Pausing Or Restarting; Changing Cycles And Options; Status Lights; Cycles - Whirlpool WFW9150WW00 Use & Care Manual

1. To pause the washer at any time, press START/PAUSE.
2. To continue the cycle, press and hold START/PAUSE (for
approximately 1 second).
Not all Options are available with all Cycles.
Cycles and Options can be changed anytime before START/
PAUSE is pressed.
To cancel a cycle
1. Press POWER.
2. The washer powers down, the door unlocks, and clothes can
be removed.
NOTE: If the water level or the temperature is too high, the washer
will drain automatically before the door unlocks.
To change Options after the cycle has started
1. Press START/PAUSE once.
2. Press the desired OPTIONS. If the option is not available, the
machine will beep.
3. Press and hold START/PAUSE (for approximately 1 second) to
continue the cycle.
NOTE: Press and hold TUMBLEFRESH option button (approx. 1
second) to add periodic tumbling. See "Options" for complete
cycle description. The light will glow when selected and will
remain flashing for up to 6 hours or until the washer is stopped by
either pressing POWER or opening the door.
To drain the washer manually
1. Press START/PAUSE.
2. Press RINSE/DRAIN & SPIN.
3. Deselect EXTRA RINSE Option.
4. Press and hold START/PAUSE (for approximately 1 second) to
begin the drain.
5. When the spin is complete, the door unlocks. Items can be
removed from the washer.
These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional item
to the wash cycle and when the controls are locked.
STATUS
Add a ,i
Garment IF
Wash O
Rinse O
Spin
Done
Door Lock
Control Lock _ (_#'_'_
Q
LT o 2 FerZt,o,
IocWunlock
control
Adding items
You can add items to the washer after the wash cycle has started,
if the Add a Garment status light is illuminated. All cycles have this
feature except Rinse/Drain & Spin, and Clean Washer with
AFFRESH
TM
cycle.
To add items
1. Press START/PAUSE. The washer door unlocks, and items
can be added.
2. To continue the cycle, close the door and press and hold
START/PAUSE (for approximately 1 second).
NOTE: To add garments after the Add a Garment period is over,
the wash cycle needs to be canceled, the items added, and a new
wash cycle started.
Done
The Done light comes on after the cycle is complete. The light will
stay on until door is opened.
Locking controls
The Control Lock avoids unintended use of the washer. You can
also use the control lock feature to avoid unintended cycle or
option changes during a cycle. When Control Lock is illuminated,
all buttons are disabled except for START/PAUSE and POWER.
You can lock the controls while the washer is operating.
To lock the controls
Press and hold TUMBLEFRESH
TM
option for 3 seconds.
O
TumbleFresh
hold 3 sec to
lock/unlock
control
The Control Lock status light illuminates.
To unlock the controls
Press and hold TUMBLEFRESH
TM
option for 3 seconds until the
CONTROL LOCK Status light turns off.
Door Lock
When the status light illuminates, the door is locked. The door is
locked and unlocked automatically, depending on the stage of the
wash cycle.
Wash Cycles
Choose Wash Cycles by rotating the Cycle selector knob to the
desired cycle. Each cycle is designed for different types of fabric
and soil levels.
NORMAL
SMALLLOAD m ECOHEAVY DUTY
HEAVY DUTY DELICATE
SILK _,_X WHITEST
RINSE/
DRAIN&SPIN
SOAK CLEAN
WASHER
with
affresh
Each cycle has a preset cycle time, TEMP, SPIN SPEED, and
may have preset Options. The preset settings provide the
recommended fabric care for the selected cycle.
14