Table of Contents
Advertisement
ASSEMBLY
Assembly requires two persons.
Because of its size and weight, assemble
the
weight bench in the location where it will be
used. Make sure that there is enough
clear-
ance to walk around the weight bench as you
assemble
it.
Place all parts in a cleared area and remove
the packing materials.
Do not dispose
of the
packing
materials
until you complete
all
assembly
steps.
To identify small parts, see page 5.
The following
tools (not included) may be
required for assembly:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
_===_
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
.
Orient the Front Stabilizer (2) so that the square
holes are facing the floor.
Attach the Front Leg (4) to the Front Stabilizer
(2) with two M10 x 82mm Carriage Bolts (55)
and two M10 Locknuts (37). Do not tighten
the
Locknuts
yet.
Then, tighten an M8 x 65mm Screw (56) with
an M8 Washer (36) into the Front Stabilizer (2)
and the Front Leg (4).
Sq
6
Advertisement
Table of Contents
