Troy-Bilt 020242-4 Operator's Manual page 5

Section 1: Safety Rules
CAUTION
, DO NOT tamper with governed speed
. DO NOT operate pressure washer above rated pressure.
CAUTION
DO NOT secure spray gun in open position.
DO NOT leave spray gun unattended while machine is
running.
NEVER use a spray gun which does not have a trigger lock or
trigger guard in place and in working order_
AN_,ays be certain spray gum nozzles and accessories are
correctly attached.
l
[f you have questions about intended use, ask dealer or
contact
Briggs & Stratton
Power Products.
NEVER operate units with broken or missing parts, or
without protective housing or covers.
DO NOT by-pass an>, safety device on this machine.
Before starting pressure washer in cold weather, check all
parts of the equipment to be sure ice has not formed there.
NEVER move machine by pulling on hoses. Use handle
provided on unit.
Check fuel system for leaks or" signs of deterioration, such as
chafed or spongy hose, loose or missing damps, or damaged
tank or cap. Correct all defects before operating pressure
washel'L
This equipment is designed to be used with Briggs & Stratton
Power Products authorized parts ONLY. If equipment is used
with parts that DO NOT comply with minimum specifications,
user assumes all risks and liabilities.
, DO NOT point spray gun at glass when using MAX (pin
point)
nozzle.
, NEVER aim spray gun at plants.