Preparation; Installing Batteries In The Remote Control; Using The Remote Control - Sharp AQUOS LC-15S5U Operation Manual

Preparation
innnl,nl nnnnllll,nl,i
Before using the LCD TV set for the first time, install the two "AAA" size batteries supplied in the remote control When the
batteries become depleted and the remote control fails to operate, replace the batteries with new <'AAA" size batteries
Open the battery cover
2
Insert two "AAA" size batteries
3
Close the battery cover
-, Stide the cover while
pressing the ( _ )
part
_-Z_ Caution _..f)
Precautions regarding batteries
= Place batteries with their
terminals corresponding
to the (+) and (-)
indications in the battery
compartment
i= Engaging the lower
claw with the remote
control, close the cover
,_ tmproper use of batteries can restJit in a leakage of chemicals and/or explosion Be sure to follow the instructions befow
• Place batteries with their terminals corresponding to the (+) and (-) indications
• Different types of batteries have different characteristics Do not mix batteries of different types
• Do not mix old and new batteries Mixing old and new batteries can shorten the life of new batteries andlor cause old
batteries to leak chemicals
• Remove batteries as soon as they are depleted Chemicals that leak from batteries can cause a rash if chemical
leakage is found, wipe it offwith a cloth
• The batteries supplied with the LCD TV set may have a shorter operating time due to storage conditions
• If the remote control is not to be used for a long period of time, remove the batteries from the remote control
= Use the remote control by pointing it towards the remote sensor
window of the main unit Objects between the remote control and
sensor window may prevent proper operation
;ontrol ::; :
Cautions regarding use of the remote control
.. Do not apply shock to the remote control In addition, do not
expose the remote control to liquids, and do not place it in an area
with high humidity
= Do not install or place the remote control in direct sunlight The
heat may cause deformation of the unit
,,, The remote control may net work properly if the remote sensor
window is in direct sunlight or strong lighting tn such a case,
change the angle of the lighting or main unit, or operate the
remote control closer to the remote sensor window
',...
30°
sensor
J
(_ 7