Using Digital Audio Output; Connecting Hdmi Equipment; Connecting A Pc - Sharp Aquos LC-46SE94U Operation Manual

Preparation
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 31 for details.) PCM audio
outputs from the terminal.
To optical digital input of
external audio devices
DIGITAL
AUDIO
Optical fiber cable
(commercially available)
, Depending on the connected equipment, audio will not output from the DiGiTAL AUDIO OUTPUT terminal in HDMI
connection. Ill this case, set the audio formats of tile connected equipment to PCM, 32/44.1/48 kHz and 16 bits.
You can use the INPUT 4, INPUT 5 or INPUT 6 terminal when connecting HDMI equipment.
HDMI-certified cane
(commercially available)
, When using an HDMI DVI conversion cable, input the audio signal to the AUDK_ terminal of INPUT 6.
, To enjoy the AQUOS 1080p display capability, connect your Blu ray disc player, HD DVD player or other external equipment
using an HDMI certified cable and set the equipment to 1080p output.
ii:.
When connecting to a PC with an analog RGB terminal (INPUT 7):
RGB cable
(commercially available)
© 3.5 mm stereo minijack cable
PC (commercially available)
When connecting to a PC with an NDMI terminal (INPUT 4, 5 or 6):
HDMbcertified cable
(commercially available)
PC
,, The HDMI terminals only support digital signal.
,, Refer to page 50 for a list of PC signals compatible with the TV.
Q-14