Appendix; Removing The Stand - Sharp Aquos LC-46SE94U Operation Manual

Appendix
Before detaching (or attaching) the stand, unplug the AC cord from the AC INPUT terminal.
® Do not remove the stand from the iV unless using an optional wail mount bracket to mount it.
[] LC=46SE94U/LC-52SE94U
Before attaching/detaching the stand
• Before performing work, make sure to turn off the W.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
"1
Hexkey
I'f' _'lt
Unfasten the four screws used to
secure the stand in place.
Detach the stand from the TV.
(Hold the stand so it will not drop
from the edge of the base area.)
3
Attach the stand hole covers.
(Align the tabs of the covers with
the holes on the TV, and press
until they lock into place.)
• To attach the stand, perform the above steps in reverse order.
[] LC=65SE94U
Before attaching/detaching the stand
• Before performing work, make sure to turn off the W.
r1
ZTT " _ .......:'_X_
Unfasten the four screws used to
secure the stand in place.
Detach the stand from the TV.
3
Attach the stand hole covers.
(Align the tabs of the covers with
the holes on the TV, and press
until they lock into place.)
To attach the stand, perform the above steps in reverse order.
Q- 45