Maintenance; Moving Your Schwinn ® Ic Bike; Leveling Your Schwinn ® Ic Bike - Schwinn IC PRO Owner's Manual

Maintenance
NOTE: Do not operate or store this machine in damp or wet conditions.
Dampness can cause rust.
Moving your Schwinn ® IC Bike
Make sure that the handlebar is securely attached to the bike and that
the pop pin has been turned clockwise until tight. Standing in front of
the bike, grasp the handlebars at their very ends. Place one foot on the
lower stabilizer bar and tilt the bike towards you. Once the bike has
tilted enough to engage the transport wheel, you will be able to easily
roll the bike in any direction. Be gentle while moving the bike as any
sudden impact may affect the operation of the machine.
Leveling the unit
The Schwinn ® IC Bike can be leveled to compensate for uneven
surfaces. To level the bike, raise or lower the four leveling bolts
located on the underside of the legs using an adjustable wrench.
11
Owner'sManual