Getting Ready To Install The Refrigerator - Samsung RF266 User Manual

Hide thumbs Also See for RF266:
Table of Contents

Advertisement

Available languages

Available languages

GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations
on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art
features and effidencies
that this new appliance offers.
Selecting
the best location
for the Refrigerator
• A location with easy access to the water supply.
• A location without
direct exposure to sunlight.
• A location with level (or nearly level) flooring.
• A location with enough space for the Refrigerator doors to open easily.
• Allow sufficient
space for air circulation
of the internal cooling system.
If the Refrigerator does not have enough space, the internal cooling system
may not work properly.
If your refrigerator has an ice maker, allow extra space at the back for the water line connections.
When you install the refrigerator next to a fixed wall, minimum clearance is 3 ]A" (95ram) between the refrigerator and wall to
allow the door to swing open.
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following
chart details the exact height and depth of Samsung French Door Refrigerator.
Model
Depth
Width
Height
Overall
Depth
"A ....
B....
C"
Height "D ....
E"
RF266
29- 1/8"
35-3A "
69"
69-3A "
35- 5/8 "
RF263
(83.6cm)
(90.8cm)
(175.2cm)
(177.4cm)
(90.5cm)
[_,
Allow clearance to the right, left, back and top when installing. This will help reduce power consumption
and keep your energy bills lower.
• Do not install the Refrigerator where the temperature
will go below 50 °F (10 °C).
• Condensation
may occur on the french door areas when you use Refrigerator
for the first time.
The E.Saver function
is automatically
set to on when power is supplied to the Refrigerator.
If you experience excess condensation,
press the E.Saver button again to turn the feature off.
When moving your refrigerator
To prevent floor damage be sure the front levelling legs are
in the up position
(above the floor). Refer to 'Levelling the
refrigerator'
in the manual.
To protect the finish of the flooring,
place the protection
sheet such as packing carton under the refrigerator.
Control
S crewdriver
CAUTION
When installing, servicing or cleaning behind the refrigerator,
be sure to pull the unit straight out and push back in straight
after finishing.
8_ Setting Up

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rf263

Table of Contents