Removing The Refrigerator Doors - Samsung RF266 User Manual

HOW TO ASSEMBLE THE HANDLES (CONT'D)
F
Freezer / Flex zone door handle assembly
"o best conceal the conneclion
)oints : Assemble the handles
with the mounting screws facing
down,
Put the handle on the fixer
By using L--wrench, Fix the screw with the Longer part of it and
then fully tighten up wkh the Shorter part,
Tilt up the Handle bar and turn the wrench.
Pleasedo not remove the Freezer/ Flex Zone drawer. Handle can be attached without removing the door.
CAUTION
REMOVING THE REFRIGERATOR
If your entrance won't allow the Refrigerator to pass easily
through it, you can remove the doors.
Tools you will need
Philips screwdriver 10mm Socket Wrench
Flat-blade screwdriver Pliers
Allen wrench(3/16")
Disassemble the Refrigerator doors
1. With the door closed, remove the top table(_)
using a Philips screwdriver, and then disconnect the
wires(2_}). Remove hinge screws((_}) and ground
screw([_)
2. Lift the door straight up to remove.
3. With a Philips head screwdriver, remove the two
screws((_[}) attached to the lower left and right
door hinges.
With an Allen Wrench(3/16"), remove the two hex
head bolts(_}) attached to the lower left and right
door hinges.
Remove the lower left and right door hinges((_).
lOSetting Up