Samsung BD-UP5000 User Manual page 50

eersistent storaae manaaement
I U
SYSTEM DEVICE MANAGEMENT
You can manage such information as stored provider and content directory.
To setup, follow steps 1 to 2 in "TCP/IP Setting" on page 47.
3. Press the • • buttons to select System Setup, then
press the ENTER or • button.
4. Press the • • buttons to select Persistent Storage
Management, then press the ENTER or • button.
5. Press the • • buttons to move sub-directory, then press
the ENTER or • button.
- To delete a directory -
Use the • • button to select a file to delete and press the
BLUE(D) button. (You cannot delete devices.)
Description of Device Information
• Category : Indicates if this device is a built-in or a
hot-plug device.
- Required : Built-in device
• Slot Status : Indicates the current slot type of the
device.
- Non Slot : Device that does not support hot-plug.
• Device Name : Name of the device
• Total Size :Total size of the device
• Available Size :Available sizeof the device
• Average Read Rate : Data read rate from the device
(based on the device spec)
ProviderList
Area
Highlight
i Device Information
ScrollBar
Inmostcases, the Provider directory c ontains related filestoeachmoviemaker a ndtheContents directory s tores
related filesto each title,
(These d irectories contain b ookmark information filescreated i nplayback ofa movie or downloaded filesthrough t he
nelwork)
_ Allof thefilesinthedirectories a renotvisible to users,
Ifyoudelete the directory, allthefilesinthatdirectory w ill bedeleted accordingly,
_* Press the RED (A)buttoninthe Provider directory t o moveupto theparent d irectory, ' Device',
Press the GREEN ( 13) b uttonintheContents d irectory t o moveupto theparent d irectory, ' Provider',
Tothe rightofthedirectory/content list,normally t hereappears information onthe current d evice (name, s pace
used, d atatransfer r ate),
*_ Themoviemaker c andisplay animage instead of thedirectory n ameintentionally or forits ownreason,
50 persistent stora{_e mana_3ement