Samsung BD-UP5000 User Manual page 39

SETTING UP THE SPEAKER OPTIONS
If you have connected this player to an Amp/Receiver or Home theater viathe 7.1 channel Analog outputs you need
to set the Speaker Options for the best sound.
1. With the unit in Stop mode, press the MENU button.
2. Press the • • buttons to select Setup, then press the
ENTER or • button
3 Press the • • buttons to select Audio Setup then press
the ENTER or • button
4. Press the • • buttons to select Speaker Setup, then
press the ENTER or • button.
5. Press the • • _1• buttons to select the desired Speaker,
then )ress the ENTER button.
6. When done, use the • • _1• buttons to select Save, then
press the ENTER button.
If you don't want to save your work, use the • • _1•
buttons to select Cancel, then press the ENTER button.
Pressthe RETURN or _1 buttonto returnto the previous menu,
Speaker Setup
ro R)
Large, Small
LargeSmall None
r,
Large,
Small, None
On,Off
ron_
Large, S mall, None
Speaker
• Large : Delivers full bandwidth sound with bass below 1O0
Hz.
• Small : If LFE is on, bass below 1O0 Hz will be outputted
through a Subwoofer instead of the speakers. If LFE is off
and the Front Speaker is set to Large, sound will be
outputted through the Front Speaker.
• None : Select to disable the speakers.
Subwoofer Speaker
• On : Select to use the subwoofer speaker.
• Off : Select to disable the subwoofer
speaker.
(This option can only be selected when the
Front (L+R)speakers are set to Large.)
Press the RED(A) button
• A test tone will be sent to L -- C -- R -- RS
-- RSB -- LSB -- LS -- LFE in order so you
can make sure the speakers are set up
correctly
• To end the test tone press the RED (A)
button again
• The test tone can only be activated when no
discs are in the unit
• The test tone outputs through the 71 channel
analog outputs only
IEngHish 39