Regarding The Battery - Samsung BD-UP5000 User Manual

SETTING THE REMOTE CONTROL
You can control certain functions of your TV with this remote control.
Control function buttons include : TV POWER, CH AV, VOL + -, TV MUTE, TV INPUT SEL., DIRECTION/
ENTER button. However, the DIRECTION/ENTER button can only operate when the TV INPUT SEL. button has
been selected.
To determine whether your television is compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press and hold the TV POWER button and enter the two-figure code corresponding to the brand of
your television, by pressing the appropriate number buttons. (see the next page for the code list).
Ifyour television is compatible with the remote control, it will switch off.
It is now programmed to operate with the remote control.
[_ If several c odesareindicated foryourtelevisionbrand, t ry eachoneinturn untilyoufind onethatworks.
If youreplace the remotecontrol'sbatteries, y ou mustsetthe brandcodeagain.
You can then control the television using the following buttons after pressing the TV button.
Button Function
IV POWER Used to switchthetelevision o nandoff.
IV INPUT S EL. Used to select a n external source.
IV VOL (+ -) Used to adjust t he volume ofthetelevision.
IV OH (^V) Used to select t he desired channel.
IV MUTE Used to toggle thesound onandoff.
Used to moveup/down/left/right (A, v, .q, I_) andtoselectadesired item.
DIRECTION!ENTER *(only worksunder t he R/INPUTSEL.buttonselected)
[_ Thefunctionslistedabovewill not necessarily w orkonall televisions. I fyouencounterproblems, operate the
television directly.
REGARDING THE BATTERY
If the remote does net operate properly:
• Check the polarity+ - of the batteries(Dry-Cell)
• Check if the batteriesare drained.
• Check if remote sensor is blocked by obstacles.
• Check if there is any fluorescent lightingnearby.
Dispose of batteries according to local environmental regulations. Do not put them in the
household trash.
18 [emote cent[el