RCA T090802 User Manual page 18

Using the Playback Features
Time Counter
The time counter helps locate the beginning or end of programs you
taped. The time counter automatically resets to 00:00:00 each time a
tape is inserted.
1. While a tape is playing, press DISPLAY twice to continuously
display the time counter in the upper left corner of the screen.
2. Press CLEAR to set the time counter
to 00:00:00.
3. Press DISPLAY twice to remove the time counter from the screen.
E 00:00:00 I
Memory Stop
Memory stop will mark the beginning or end of programs or
particular scenes so that you can easily locate them later.
1. While a tape is playing, press DISPLAY twice to show the time
counter in the upper left corner of the screen.
2. Press CLEAR to set the time counter to 00:00:00.
3,
4,
5,
Press
DISPLAY
again to enter the scene into memory. An "M"
appears next to the time counter. The scene is now entered into
memory.
To return to the scene, press STOP (the timer counter/memory
stop marker, the "M", must be on the screen in order for this to
work properly - if not, press DISPLAY until the display appears).
Press FORWARD or REVERSE to return to the desired scene. The
TV/VCR stops when it reaches the time counter/memory stop
marker.
6. Press PLAY to view the scene.
I O0:O0:OOM I
16