Sleeptimer; Setting The Sleep Timer; Cancelling The Sleep Timer - RCA Scenium PHD50300 User Manual

High definition plasma display

Hide thumbs Also See for Scenium PHD50300:

Table of Contents

The

System

Sleep Timer

The sleep timer is a feature that allows yoll to set tile monitor to turn off after a prescribed

amount

of time. It can be set to turn tile power off after 30, 60, 90 or 120 minutes.

Setting the Sleep Timer

1. Press the SLEEP button on the remote to turn on the timer. Tile default is 30 minutes.

2. Press tile SLEEP button again to move to the next time increment.

Press the SLEEP button

until you get to the desired time.

_30_

60_90_120-_0_

3.The timer starts when the Sleep display disappears

from the screen.

To check the Remaining

Time:

1. Once the sleep timer has been set and tile menu has turned off, press the SLEEP button

once.

2. The remaining

time is displayed,

then disappears

after a few seconds.

3. When five minutes remain, the remaining

time appears

until it reaches zero.

Cancelling the Sleep Timer

1. Press the SLEEP button twice in a row.

2. The sleep timer is canceled.

NOTE: After the power is turned off"with the sleep timer, a slight current is still supplied

to the monitor. If you do not plan to use the system for a long period of time, turn the

power off with the remote or on the unit.

Chapter6

Table of Contents