Table of Contents
Advertisement
Connections
and
Setup
RCAcables (audio/videocables)are sold as a bundled set.
Connecting Your VCR Or Laserdisc
Player
Use common
RCA cables (not provided)
to connect your VCR or laserdisc
player to your monitor. To connect your VCR or Laserdisc player:
1.
Turn off the power to the monitor and VCR or laser disc player.
2.
Connect one end of your RCA cable to the video output connector
on the back of your VCR or laser disc player. Connect the other end
to the video input on the monitor.
,
Use standard
RCA cables to connect the audio from your VCR or
laser disc player to AUDIO2 input jacks on the monitor (if your VCR
or laser disc player has this capability).
Be careful to keep your right
and left channel connections
correct for stereo sound.
4.
Turn on the monitor and the VCR or laser disc player.
NOTE: Refer to your VCR or laser disc player user's manual./br
more
information
about your equipment's
tJideo output requirements.
To connect your monitor to a DVD player:
1.
2.
Connecting Your DVD Player
Turn off the power to the monitor and DVD player.
Use a standard
video cables to connect your DVD player to the CMNT1 input on the monitor,
or use the DVD player's S-Video output.
(Use a standard
S-Video cable to connect to the S-
Video input on the monitor.)
3.
Turn on the monitor and the DVD player.
Connecting
a Personal
Computer
If you have a computer
with digital RGB output,
connect it to the RGB3 jack on the monitor.
For IBM VGA (or compatible)
or Macintosh (or compatible)
connect to the RGB1 jack on the
monitor.
10
Chapter 1
Advertisement
Table of Contents
