Remote Buttons - GE VG4240 User Manual

Remote Buttons
CHANNEL Up or Down Selects next higher or lower channel
in the VCR's channel memory.
CLEAR Resets time counter to 0:00:00. Allows you to change
entries when setting the clock or a timer recording.
F.ADV Lets you view one frame with each press of the button
when tape is in pause.
FWD Fast forwards the tape when the VCR is stopped. Searches
forward through a tape during playback.
GO BACK Switches between two channels. Select one channel
and then select another using the number buttons. Press GO
BACK to switch between the two channels. In menu mode, press
to go back to previous menu.
INFO Shows the status displays on the "IV screen.
INPUT Selects between the line input and VCR's tuner. Line
input refers to the signal coming from the component connected
to the audio/video input jacks on the back of the VCR.
MENU Brings up VCR MAIN MENU on the "IV screen. Used to
select a menu item or exit a menu.
Numbers (0 through 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 - - appears on the screen. Then press the other
two numbers.
PAUSE Pauses playback or recording. Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
POWER Turns the VCR on and off.
REC (Record) Starts VCR recording. Also used for express
recording.
REV Rewinds the tape when the VCR is stopped. Searches
backward through a tape during playback.
SEARCH Displays INDEX and ZERO SEARCH menus on TV
screen when VCR is stopped. Advances the tape 30 seconds of
recorded material during playback.
SLOW Used for slow-motion playback.
SPEED Selects a recording speed (SP or SLP).
TV.VCR
©
REC
@
INPUT
0
I o
GO BACK
0
CLEAR
SEARCH
0
F.ADV
0
POWER
O
PLAY _O
STOP PAUSE
INFO SPEED
0 0
MENU CHANNEL
- TRACK +
0 0
SLOW
0
16