Playing A Tape; Tape Eject - GE VG4240 User Manual

STOP Stops the current VCR function such as record,
playback, rewind, or fast forward.
TRACK + or - Lets you manually reduce the streaks that may
appear on the picture during play or slow. Reduces picture
"jitter" during stop-action playback.
TV,VCR Switches the picture signal so that it either comes
from the VCR or cable/antenna system,
Playing a Tape
1. Tune the TV to your VCR viewing channel
(3, 4, or TV's video input).
2. Insert a tape in the VCR.
If the Auto Play feature is set to ON, the tape automatically
begins playback (if the safety tab on the cassette is
removed).
• Press FWD or REV to position the tape.
• Press PLAY (if necessary) on the remote (PLAY.PAUSE
on VCR) to begin tape play.
• Press PAUSE (PLAY.PAUSE on VCR) for stop action.
• Press TRACKING up or down to remove any streaks from
the picture, if necessary.
• Press STOP on the remote (STOP.EJECT on VCR) to stop
playback.
Tape Eject
Press STOP.EJECT on the VCR when it is stopped to
eject the tape.
Pause
If you pause, the VCR automatically
switches from pause to stop after a
few minutes to reduce tape wear.
• ii
Automatic Tracking
The VCR has automatic tracking
which adjusts the picture when
playing back a tape recorded on
another VCR. Automatic tracking is
turned On whenever a tape is
inserted or the VCR's power is
turned on.
i
17