Table of Contents
Advertisement
To Use the
Playback
Features
Index
Search
The TV/VCR
automatically
records index marks on the tape each time you
begin recording.
During playback
you can locate the program
you want to
play by the number
of index marks.
Your TV/VCR
has two index playback
features.
You can select a specific index number
or search by scan and play.
To Select
Scan and Play Index
Playback
1. Insert the pre-recorded
tape and press STOP.
2. Press SKIP/SEARCH
to display
the INDEX SEARCH screen.
3. Press FF to scan forward
or REW to scan in reverse.
When the TV/VCR
locates an index mark, it stops and plays a few
seconds
of the program
following
the mark.
4. At any time during the search, press PLAY to stop searching
and begin
playback,
or press STOP to stop the search.
If the beginning
or end of the tape is reached
during
the search, the
message Scan completed-end
of tape appears.
To Select
a Specific
Index
Number
for Index
Playback
1. Insert the pre-recorded
tape and press STOP.
2. Press SKIP/SEARCH
to display the INDEX SEARCH screen.
3. Use the number
buttons
to enter the number
of index marks through
which you want the TV/VCR
to search.
4. Press FF to search forward
or REW to search in reverse.
When the TV/VCR
locates the index mark, it will begin playback.
If the specified
index mark is not found during
the search, the message
Index -- was not found appears.
When using index playback,
the following
index marks
may be skipped
by
the TV/VCR.
•
The mark closest to the current location on the tape.
•
The mark at the beginning
of a recorded
segment
of five minutes
or less.
•
The mark at the beginning
of the tape.
INDEX
SEARCH
Press
REW
or
FF
to
begin
scanning
OR
Enter
a specific
index
number
below
INDEX
SEARCH
Searching
for
index
marks...
Press
STOP
to
cancel
INDEX
SEARCH
Press
REW
or
FF
to
begin
scanning
OR
Enter
a
specific
index
number
below
/j\
INDEX
SEARCH
Searching
for
index
02.
Press
STOP
to
cancel
20
Advertisement
Table of Contents
