Table of Contents
Advertisement
USING
THE INPUT
BUTTON
1.
2.
Repeatedly
press the INPUT button
to scroll through
the available
input sources until you find the input associated with the
component
(such as VCR or DVD player) you want to view.
Input
source
Watch the channel
banner to see the input sources change
with each press of the INPUT button.
Once you have found the input source you want, stop pressing
INPUT.
If you tune to VID1 and your VCR is connected to that input,
you will be able to view your VCR. To play, stop, or rewind
the
VCR1 tape using the remote that came with your TV, you must
first press the VCR1 button
to put the remote control
in VCR
mode.
INPUT
button
There are other ways of selecting an input channel:
Program the component
(VCR, DVD, etc.) buttons on the remote
control to automatically
tune to the correct input channel when
pressed. See the section in this book, "System Options
and
Preferences"
for information
on auto tuning.
•
After pressing INPUT on the remote, enter the digits 1, 2, 3, 4, or 5
to tune to (S)VID1, 2, 3, FRONT, or CMPNT respectively.
•
After pressing INPUT on the remote,
press GUIDE on the remote
control to view a guide-like
list of your line inputs and
corresponding
channels.
30
Advertisement
Table of Contents
