Table of Contents
Advertisement
GO BACK
Moves you back and forth
between
the last two channels
selected in either DIRECTV mode or TV mode. For example,
if you have
been viewing
both DIRECTV® and TV channels (and thus using both the
DIRECTV and TV "modes"),
pressing GO BACK while watching
a
DIRECTV® channel moves you back to the last DIRECTV® channel you
viewed.
Pressing it while watching
a TV channel moves you to the last
TV channel you viewed.
In the menu system, pressing GO BACK returns
you to the previous menu screen.
(Light
Bulb Button)
Press to illuminate
some of the remote control's
buttons. To conserve battery
power, the light turns off after several
seconds.
GUIDE
When in TV mode, brings up the TV program
guide. In DIRECTV
mode, brings up the DIRECTV® programming
guide. Subsequent
presses
of the GUIDE button
scroll through
the different
types of guides. Press
GUIDE after pressing INPUT to get a guide-like
list of available
video
input channels.
INFO
Brings up channel and viewing
information
via the channel
banner. Quickly press again to bring up an extended
channel banner
and press a third time to remove the banner. Press when in the program
guides to get more information
on the highlighted
program or channel.
ARROWS
Used to point to different
items in the menu system and
adjust the menu controls.
Also move the PIP window
when no menus
are on the screen.
OK
When in the menu system and other on-screen displays, selects
highlighted
items.
MENU
Brings up the main menu and selects highlighted
items. When
in using an RCA, GE, or PROSCAN VCR and in VCR mode, it functions
as a
PROGRAM button.
CLEAR
Removes on screen displays and returns to normal viewing.
If
no displays are present and the skip timer is set, CLEAR will cancel the
commercial
timer.
DIGIT BUTTONS (0 - 9)
Enters channel numbers and time settings
directly though
the remote control.
For more information
on entering
digits to change channels, see the section "Basic TV Operation."
When in
the menus, the digit buttons
can be used to directly
select items without
using the arrows. 0 can be used to return to the previous menu screen.
INPUT
Toggles through
the available external
input sources.
ANTENNA
Switches the source of the off-air
signal between
the
HDTV's ANTENNA A and B. When in VCR mode, the ANTENNA button
also functions
as a TV/VCR button.
REVERSE, PLAY, FORWARD, RECORD, STOP, PAUSE
If programmed,
provides transport
control for some remote-controllable
VCRs, DVD
players, laserdisc players, tape decks, and CD players when the remote is
in that mode. When in TV or DIRECTV mode, FORWARD will toggle
through
screen formats.
PiP (Picture-in-Picture)
When viewing
an analog signal, brings up the
small PiP window.
Press again to hide PIP.
SWAP
Exchanges the main analog picture with the analog PiP window.
CH CTRL (Channel Control)
Selects the picture window
(either the
main or PiP window)
that will change when you press the CH +, CH -,
INPUT, or digit buttons on the remote control.
WHO
Toggles through
user profiles.
I
on't worry about getting stuck inside a
|
menu. Pressing the CLEAR button on the
J
remote control takes you out of the menu
system.
19
Advertisement
Table of Contents
