SETUP AND CONNECTIONS
USING YOUR
REMOTE
CONTROL
INSERTING
BATTERIES
1.
Remove the battery compartment
cover from the remote control.
2.
Insert batteries (included)
as shown
on the diagram
inside the
battery compartment.
3.
Replace the battery compartment
cover.
Use your remote control
from a distance of about 7m/23 feet from the
monitor's
remote control
sensor and at a horizontal
angle of within
30 °. The remote operates on line of sight, so if there is anything
blocking
the path between the remote and the remote control
sensor
on the front of the monitor,
the remote
may not work.
Don't expose the remote control
sensor on the front of the monitor
to direct sunlight
or strong artificial
light.
Don't get the remote control
wet.
Avoid
heat and humidity.
When
not using the remote for a long period of time, remove the
batteries.
Installing
the batteries
PROGRAMMING THE REMOTE
The universal
remote control
that came with your Cinema
Screen
monitor
is already programmed
to operate most RCA, GE, and
PROSCAN
VCRs, DVD players, laserdisc
players, and satellite
receivers. This remote is also capable
of operating
many other brands
of remote-controllable
electronic
components,
but you must program
it to do so.
FIND
OUT
IFYOU
NEED
TO PROGRAM
THE REMOTE
To determine
whether
the universal
remote needs to be programmed,
turn on one of your components,
such as a VCR. Point the remote
control
at the component
and press the component
button (for
example,
the VCR button).
Now press the ON-OFF
button on the
remote. If the component
doesn't
turn off, you need to program the
remote control
in order for it to operate that component.
Approx.
7m/23 ft.
15