Plug In The Tv; Put Batteries In The Remote; How To Use The Remote Control To Complete The Initial Setup; Turn On The Tv - RCA D52W25 User Manual

Rca d52w25: user manual

Hide thumbs Also See for D52W25:

Table of Contents

Connections & Setup

��

Plug in the TV

Plug the end of the power cord into a grounded wall outlet. Insert the plug

completely into the outlet.

•

Remove the battery compartment cover from the back of the remote by

pushing the tab and lifting off the cover.

•

Insert two fresh batteries. Make sure the polarities (+ and -) are aligned

correctly.

•

Replace the cover.

How to Use the Remote Control to

Complete the Initial Setup

TV button

The technical term is "Navigation" – how you move through the on-screen

menus. The theory is the same throughout the menu screens: highlight your

choice and select it.

To highlight a menu item, press the arrow buttons on the remote to highlight

button

one of the items listed on the screen. Use the up or down arrow button to

move up or down. Use the right or left arrow button to move right or left.

Arrows

To select the item that you've highlighted, press OK.

Note: Highlighted means that the menu item stands out from other

menu items on the list (appears darker, brighter, or a different color).

Press TV on the remote, or press POWER on the TV's front panel.

Note: Pressing the TV button not only turns on the TV, but puts the

remote into TV mode. "TV mode" means that the buttons on the remote

control operate the TV's functions.

Chapter 1

Table of Contents