Plug In The Hd Monitor; Put Batteries In The Remote; How To Use The Remote Control To Complete The Initial Setup; Turn On The Hd Monitor - RCA D52W23 User Manual

DVD ON•OFF
AUX•HD TV
VOL CH
MUTE GO BACK
MENU MENU
CLEAR
ok ok
Chapter 1

Plug in the HD Monitor

Plug the flat end of the cable into the power jack on the back of the HD Monitor.
Then plug the other end of the power cord into an appropriate wall outlet. Be
sure to insert the plug completely. Do not plug the HD Monitor into an outlet
controlled by a light switch.

Put batteries in the remote

• Remove the battery compartment cover from the back of the remote by
pushing the tab and lifting off the cover.
• Insert 2 fresh batteries. Make sure the polarities (+ and -) are aligned correctly.
• Replace the cover.
How to Use the Remote Control to
Complete the Initial Setup
TV button
The technical term is "Navigation" – how you move through the on-screen menus.
The theory is the same throughout the menu screens: highlight your choice and
select it.
OK
button
To highlight a menu item, press the arrow buttons on the remote to highlight one
of the items listed on the screen. Use the up or down arrow button to move up or
Arrows
down. Use the right or left arrow button to move right or left.
To select the item that you've highlighted, press OK.
Note: Highlighted means that the menu item stands out from other menu
items on the list (appears darker, brighter, or a different color).

Turn on the HD Monitor

Press TV on the remote, or press the Power button on the HD Monitor's front
panel.
Note: Pressing the TV button turns on the HD Monitor and puts the remote
into TV mode. "TV mode" means that the buttons on the remote control
operate the HD Monitor's functions.
Connections & Setup
11