The Picture Quality Menu; Setting The Picturemode - RCA PR42300 User Manual

THE MENU SYSTEM
THE PICTURE QUALITY MENU
SETTING THE
PICTUREMODE
The Cinema Screen monitor has preset viewing modes that can be selected
depending on your viewing environment. Each preset mode has the
contrast, brightness and sharpness adjusted for a specific viewing situation.
MEMORY - This mode allows you to set and save your own picture
adjustments.
SOFT - Use this mode when watching your Cinema Screen in a dark
room. Soft mode provides a darker, finer picture, like the screen in
movie theaters. These settings are preset for you and can't be
changed.
BRIGHT - Use this mode when watching your Cinema Screen
monitor in a bright room. This mode provides a picture with distinct
differences between light and dark areas. These settings are preset for
you and can't be changed.
NORMAL - The factory default.
To change the picture mode:
1. From the main menu, select PICTURE QUALITY. The PICTURE
2,
,
QUALITY Menu will appear.
Highlight the PRESETS option and press the • key on the remote to
select it. The PRESETS window appears.
Use the • button on the remote to select the desired mode. The
mode switches as follows when the • button is pressed:
r_- MIIJMI_RY_ SI_IL1 " _ IIRIGI'II' _ Nl_l_/--m
/ /
Note: If you don't push the • button within 5 seconds, the current
selection is set and the previous screen reappears.
Once you've selected the desired mode, press OK or MENU. The picture
mode is now set and you are returned to the PICTURE QUALITY screen. If
you are using MEMORY mode, you can manually adjust the picture
settings (contrast, black level, and sharpness). You can continue adjusting
settings in the PICTURE QUALITY menu, return to the main menu, or exit
the menu system.
To return to the main menu, press the GO BACK button on the remote. To
exit the menu system, press CLEAR.
This is the PICTURE Quality menu with the
PRESETSoption highlighted.
24
This is the PRESETSscreen with SOFT as the
current selection.