RCA F27678 User Manual page 33

References
.Trouble Checks
Trouble
Remote
Buttons don't work when you
• press them
Checks and Adjustments
Press TV to set the remote to control the TV. See buttons on page 6-7.
o.
Workspart
or none of the
time
Clear the path between the remote and TV of any objects.
Aim the remote at the component you are trying to control.
Press TV so remote wig control TV.
Make sure batteries in the remote are not dead.
See if batteries are placed in remote correctly. See batteries, page 2.
Can't select certain channel
Noisy stereo reception
Picture okay, n0 sound
Picture okay, sound poor
NO stereo on stereo statiott
TV Turns on or Off
Turns off by itself
Turns on by itself
.Doesnot turnoff:at.•
Alarm Time
Press number buttons. Channel may not be in memory. See autoprogram
on page 20.
Make sure TV/YCR switch on VCR is in the TV position.
For numbers over 100, press and hold lun_ 1- appears, then press the
other two numbers.
Set Cable/Air feature to Cable for channels higher than 69. See page 27.
Turn Stereo off. The stereo broadcast may not be dear. See page 18.
Press VOLUME + or MUTE to restore sound.
• Make sure TV's speakers are on. Details are on page 19.
Try another channel.
Try adjusting the Tonel See page 18.
Change Stereo to off. The stel_oo broadcast maynot be dear. Seepage 18.
:Make sure Stereo is turned on. See page 18.
\
Check Sleep Timer. See Sleep timer on page 22.
Wait 30 seconds and turn onagain, a power surge may have occured.
• Check Alarm Offtime. See alarm clock on page 23.
Check Alarm On Time: See alarm clock o_ page 23..
.t_l.eck d_ time. See clock on page 3..
Make surealaxmis _ on.oroff. See alarm clockon page 23.
Chec_ docktime. Seedock onpage 3.
31