Using Advanced Features; Placing Channels In Memo_/Autoprogra M - RCA F27678 User Manual

Using Advanced Features
Placing Channels in Memory (Autoprogramming)
Only channels 2-13 appear in the TV's memory when you first tutti it on.
The channels available in your area must be programmed into the TV's
memory when you hook up your TV. Using CHANNEL up or down
anows you to scanthrough these channels.
You may want to add or delete a few channels if some stations have weak
signals or were off the air when the TV was programmed. Referto the Add
orDelete Channels section
1. Place channels in
memory (AutoProgram)
13
A.
Bo
Co
D.
Eo
Hook up an antenna,, cable or
components before you begin
these steps or you will not be
able to add channels into
memory.
Press MENUopROG repeatedly
to selectthe Setup Menu. This
menu is white.
Press MOVE • (down) to
highlight Autoprogram.
Press MOVE• to start the TV
adding all active channels into
memory.
Wait until the TV has cycled
through all the channels and
returns to the original 'hanneL
2. Add or delete channels
_ontrols Alarm
:-."
-:" : •
13 A. Press MENU.PROG repeatedly
toselect theSetup menu. This
menu iswhite.
; B. Press MOVIE• (down) to
C. PressMOVE • tounderline the
chaimel number.
D. Select the chan_, numberyou
want to add or delete, with the
number buttons.
E. Press MOVE• to add or delete
a channel (you wigsee Stored
onthe screen when.added and
Erased when deleted).
. F.
Repeat D and E for more
channels.