RCA F27678 User Manual page 16

Using Your TV and Remote
With a Laserdisc Player: Programming and Basic Operation
Refer to your Laserdisc Player owner's manual to hook up your.Laserdisc Prayer.
The remote may need to be programmed for your laserdisc player. This
remote may not operate all models of brands listed below. Use the codes below
or on the sheet packed in with your remote.
Program the remote for
your Laserdisc Player
Basic Operation
1_11_ VCR1 SATeCA_ TV
•
O0
REW PLAY FF
<]-D
PiP SWAP
A. Point the remote at the laserdisc
player and hold LD.
B. Enter the code for your brand
from the code list below.
C. Release LD.
D.Press POWER. Ifnothing
happens, try pressing LD and
then POWER.
A. Tune TV to channel 00, 03, or 04.
B. Point the remote at the laserdlsc
player and press LD.
C. Press POWER to turn it on.
D. Use the buttons on the remote
that relate to laserdisc player
functions. Not an. buttons high-
lighted
may
work with
your
laserdisc player.
E. Press POWER to turn it off.
Laserdisc Player Codes
[ i/
Pioneer....................... _3.
ProScan.............. . ........,33
RCA ............................ 23
'.
• 14