RCA F27678 User Manual page 15

Using Your TV and Remote
With a Cable Box: Setting the Cable Channel
The Cable Channel works with CABLE on the remote, If the Cable
Channel is set, pressing CABLE selects the channel to see cable channels.
The Cable Channel setting depends on which channel your cable box
must be on to see cable channels. The channels usually used are 02, 03,
04, 05 or 06. Consult your cable company for more information.
1. Select the Setup menu
3ontrols Alarm
13
A. Press "IV to set the remote to
control the "IV.
B. Press MENUopROG to select the
Setup menu. This menu is
white.
2. Highlight Cable Channel.
Controls Alarm
13
A. Press MOVE • (down) to move
down the menu until Cable
Channelis highlighted.
B. Press l* to underline the
channel.
3. Enter channel number
;ontrols Alarm Ad
13
A. Enter the number for your cable
box, either 02,03,04,05, or 06.
Press CHANNEL down until
"Disabled"
is displayed to turn
this feature off.