ProScan PS32710YX1CJ5 User Manual page 7

SETUP AND CONNECTIONS
THE BASIC
CONNECTION
The basic connection below (TV and VCR) is the most common
connection and is therefore used to illustrate a single component
connection with your TV. For better sound and picture quality and
multiple component connection information refer to the next section,
Advanced Connections.
CABLES
You will use the following cable to make your connection:
Coaxial Cables: These cables carry both the audio
and video signal to the TV from an antenna, cable,
or cable box. In this connection, a second Coaxial
Cable carries the signal through the VCR to the TV.
CABLE, CABLE BOX, OR ANTENNA
VCR 1
I
TV
How
TO VIEW THE
VCR
To watch theVCR in this connection tuneTV to
Channel 3 or 4.
Later, in the Interactive Setup section you will
program theTV to automatically tune to Channel 3
or 4 when you turn on theVCR.
Once you have completed this connection go to Step 3, on page 9.
our TV May Differ 1
odel PS27610 does not have external
eaker terminals.
5