Table of Contents
Advertisement
HOME
CONTROL
Home Control lets you remotely control several lamps and
appliances through your DSS® receiver.
Home Control setup
The Home Control Data Interface connects to the LOW SPEED
DATA port on the back of the receiver. Once connected, you
must tell the receiver to use this port for Home Control.
1.
PressMENUoSELECT to bring up the Main menu.
2.
Point to and select Options.
3.
Point to and select System Options.
4.
Point to and select Data Port and choose Home Control as
the default setting
Device
Setup
1.
From the Main menu select Home Control.
Home Control can control several devices.
i
i
To control
devices, you must
connect a Home Control
Data
Interface
to the receiver
and a
remote
module
to the device you
want to control.
The Home
Control Data Interface
connects to
the LOW SPEED DATA port on the
back of the receiver,
o\";".'/o
LOW SPEED DATA PORT
Once connected,
you must tell the
receiver
to use this port for Home
Control.
These devices are available
as
accessories sold through
your
digital
satellite
dealer or the
accessories order form at the back
of this book.
.
3.
Select a device you would like to control.
Complete the on-screen sentence using the arrow buttons
and MENUoSELECT. PressMENUoSELECT to scroll through the
lists of appliances and locations.
52
Keep track of devices by assigning a label
Advertisement
Table of Contents
