Schedule - RCA 27GT720TX2AX1 User Manual

Schedule
The Schedule menu lets you create timers for either viewing or
recording programs. The GUIDE Plus+ system allows one-button
recording if you have connected the IR controller to your VCR.
See the Setup and Connections section of this manual for more
details on connecting the IR controller.
To schedule a program to watch or record:
1. Press GUIDE to bring up the GUIDE Plus+ system.
2. Highlight a program within the Channel listing.
3. Select Watch or Record from the Action buttons bar. The
timer is then automatically logged into the Schedule menu.
4. If you select Record, make sure to place a blank tape in the
VCR.
The program information window will display a confirmation
when you have successfully created a timer to watch or record.
If you have selected two programs to watch or record which
begin at the same time or overlap, you will receive a timer
conflict message. The GUIDE Plus+ system will not schedule a
conflicting timer, therefore you must choose between the two
programs.
To remove or change the frequency (daily, once, or weekly) of a
scheduled event, access the Schedule Menu from the Menu bar.
1. Press GUIDE to bring up the GUIDE Plus+ system.
2. Press MENU to highlight the Menu bar.
3. Use the arrows to highlight the Schedule menu selection.
4. Use the up and down arrows to highlight the program you
want to edit. Then use the Schedule Menu Action Buttons as
described in the next section.
Schedule Menu
Action Buttons
Schedule
- Menu
Selection
Schedule Menu Action Buttons
When viewing the Schedule menu the following Action buttons
will appear on the bar:
Remove Highlight the Watch or Record timer you wish to
remove from the schedule and press 1 on the remote,
Change
Highlight the Watch or Record timer you wish to
change and press 3 on the remote to toggle the frequency
between the following choices:
DAILY records the same program each day Monday
through Friday.
ONCE records only on that day.
WEEKLY records the program each week at the same time,
39