Table of Contents
Advertisement
Step 4: Plug in the
TV
Plug the end into the wall outlet, matching
the wide blade of the
plug with the wide slot in the outlet.
Be sure to insert the plug
completely.
Step
5: Place
Batteries
in Remote
Remove the battery compartment
cover from the back of the
remote.
Insert fresh batteries.
Make sure that the polarities
(+ and -)
are aligned correctly.
Replace the cover.
Step 6: Turn On the TV
Press POWER on the remote, or press POWER on the TV itself.
On-Screen
Program
Guide
The TV is designed
to bring up the GUIDE Plus+ on-screen
program
guide when you use the POWER button on the remote
to turn on the TV (after you have set up the GUIDE Plus+
system).
For more information
on setting up the GUIDE Plus+
system, see the next section, Interactive
Setup.
V0L
GO
O/-_O
O_O
MENU
CLEAR
"POWER
To get
out
of the GUIDE
Plus+
System:
Press OK to exit the GUIDE Plus+ system
and tune to the
highlighted
channel.
Press GUIDE to exit the GUIDE Plus+ system and tune to the
channel displayed
in the View window.
Press CLEAR to exit the GUIDE Plus+ system and go to the
last channel you were watching.
Step 7: Program
the TV
Proceed to the next section, Interactive Setup. The interactive
setup routine walks you through
the steps needed to configure
the TV.
10
Advertisement
Table of Contents
