ProForm CROSSWALK si User Manual page 11

2. Move your dght hand to the positionshown at the dght,
and hold the treadmill firmly. Using your left hand, lift the
storage latch. Raise the treadmill until the locking pin :
snaps into the storage latch. Make sure that the locking
pin is Inside the storage latch, and that the storage
latch is fully closed.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of di-
rect sunlighL Do not leave the treadmill In the storage
pos|tion In temperatures above 85" FahrenhelL
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stor-
age position as described on pages 10.and 11.
1. Make sure that the locking pin Is l_nsidethe storage
latch, and that the storage latch is fully closed.
2. Hold one crossbar bracket with each hand. Place one foot
on the base as shown.
3. Tilt the treadmill back until it rolls freely on the front
wheels. Carefully move the treadmill to the desired loca-
tion. To reduce the risk of injury, use extreme caution
while moving the treadmill. Do not attempt to move
the treadmill over an uneven surface.
4. Place one foot on the base, and carefully lower the tread-
mill until it is resting in the storage position.
HOW TO LOWER THE TREADMILL FOR USE
1. Hold the upper end of the treadmill with your dght hand as
shown. Using your left hand, lift the storage latch. Pivot
the treadmill slightly until the locking pin is out of the stor-
age latch.
Storage
Latch '
Pin
Crossbar
Base
\ Front Wheels
Stora¢
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. To decrease the possibility of In-
jury, bend your legs and keep your back straight.
11