Choosing A Vcr Connection; Advantages Of Audio/Video Cable Connections; Don't Forget About The Autotvncr Feature - GE VG4262 User Manual

Choosing a VCR Connection
There are several different ways to connect your VCR,
depending on whether or not you have cable service, and if you
have a cable box, and whether some of the channels are
scrambled, and maybe you have a satellite receiver along with
cable (but no cable box), or a satellite receiver and no cable
or...well, you get the picture.
Five connections are described in this section and one of them
should provide you with a VCR connection that works.
• TV with RFjack only
• TV with audio/video jacks
• TV with audio/videojacks and cable box to unscramble pay
channels only
If you need to connect additional components not shown in the
diagrams here (and are unsure of how to connect them), refer to
the instruction manual that came with that particular
component.
Advantages of Audio/Video Cable
Connections
Using a simple coaxial cable connection gives you good picture
quality. If your television has audio/video jacks, I highly
recommend using them to get even better picture quality and
stereo sound when recording and playing back videotapes.
These connections give you more convenient operation by not
having to share theTV's antenna signal.
Don't Forget about the Auto TV/VCR
Feature
The TV/VCR switch controls whether the picture signal is coming
from the VCR or the TV.
You can change the setting manually by using theTV•VCR
button on the remote or you can set the Auto TV/VCR feature to
ON when using only the ANT. IN and RF OUT jacks and OFF
when using the AUDIO/VIDEO output jacks - so your TV signal is
not interrupted when the VCR is turned on.
41