Things
to Know Before
Connecting
Components
Protect
Your Components
from
Power
Surges
•
Connect
all components
before
plugging
any power
cords
into the wall outlet.
•
Always turn off the TV and other components
before you
connect or disconnect
any cables.
¥
V
Position
Cables
Correctly
to Avoid
Audio
Hum
or
Interference
Insert all cable plugs firmly
into their jacks.
Place the audio/video
cables
to the sides of theTV's
back
panel
instead
of straight
down
the middle
after you
connect
your
components.
Try not to coil any twin-lead
cables and keep them away
from the audio/video
cables as much as possible.
Make sure all antennas and cables are properly
grounded.
Refer to the SafetyTips
sheet packed with
your unit.
Protect
Your
Components
from
Overheating
•
Do not block ventilation
holes in any of the components.
Arrange the components
so that air can circulate
freely.
•
Do not stack components.
•
Allow adequate
ventilation
when placing your
components
in a stand.
•
Place an amplifier
or satellite
receiver on the top shelf of
the stand so heated air rising from it will not flow around
other components.
6
V
V
V
CONNECTIONS
39