Choosing A Vcr Connection; Advantages Of Audio/Video Cable Connections; Don't Forget About The Auto Tv/Vcr Feature - GE VG4060 User Manual

Choosing a VCR Connection
There are several different ways to connect your VCR,
depending on whether or not you have cable service, if you
have a cable box to see this service, whether some of the cable
channels are scrambled, and so on.
Three connections are described in this section and one of them
should provide you with a VCR connection that works.
TV with RF jack only
TV with audio/video jacks
TV with audio/video jacks and cable box to unscramble pay
channels only
If you need to connect additional components not shown in the
diagrams here (and are unsure of how to connect them), refer to
the instruction manual that came with that particular
component.
Advantages of Audio/Video Cable
Connections
Using a simple coaxial cable connection gives you good picture
quality. If your television has audio/video jacks, I highly
recommend using them to get even better picture quality and
mono sound when recording and playing back videotapes.
These connections give you more convenient operation by not
having to share the TV's antenna signal.
Don't Forget About the Auto TV/VCR Feature
The TV/VCR switch controls whether the picture signal is coming
from the VCR or the TV.
Set the Auto TV/VCR feature to ON when you use only the RF
ANT. IN and OUT TO TV connections and OFF when using the
AUDIO/VIDEO OUT jacks--so your TV signal is not interrupted
when the VCR is turned on.
43