Table of Contents
Advertisement
Trouble Checks
Trouble
Checks
and Adjustments
Satellite
Receiver
No picture
For connections
4A, 4B, 5A, 5B:
1. Make sure satellite receiver is turned on and tuned to an actwe
channel.
2. Select channel
00 on the TV.
For connections
4C, 5C:
1. Turn on TV and tune it to channel
00.
2. Turn on satellite receiver.
3. Turn on VCR and set it to line mode (see glossary).
4. Select desired channel with CHANNEL button:_ on satellite receiver.
Cable
Box
No Picture
For connections
2A, 4A:
1. Turn on cable box and tune to an active channel.
2. Tune TV to output channel (usually 02, 03, or 04) of cable box.
3. Select desired channel with CHANNEL buttons on the cable box.
For connections
2B, 2C, 3B, 3C:
1. Turn on cable box and tune to an active channel.
2. Tune the TV to the output channel
(usually 02, 03, or 04) of the cable
box with VCR turned off. With VCR turned
on, tune VCR to output
channel of cable box and select channel 00 on the TV.
3. Select desired channel with CHANNEL buttors
on the cable box.
For connection
3A:
1. Turn on cable box and tune to a premium
channel.
2. Tune the TV to the output channel of cable box.
3. Place A-B switch in the B position to watch premium
channels.
4. Place A-B switch in the A position
to watch o:her channels
when cable
box is not needed.
For connection
4B:
1. Turn off satellite recewer
or press IRD/'I-V switch on satellile receiver.
2. Turn off VCR, or press TV/VGR button on VCR.
For connection
4C:
1. Turn off VCR, or press TVNCR button
on VCR.
26
Advertisement
Table of Contents
