Table of Contents
Advertisement
Things to Know Before Connecting
Cables
Protect your components
from
power surges
Connect all components
before plugging
any power cords into the
wall outlet.
Always turn off the TV and/or
component
before you connect or
disconnect
any cables.
Aw,id
audio
hum or interference
by
positioning
cables
correctly
• Insert all cable plugs firmly into their jacks.
• Place the audio/video
cables to the sides of the TV's back panel
instead
of straight
down the middle after you connect your
components.
• Try not to coil any twin-lead
cables and keep them away from the
audio/video
cables as mu.ch as possible.
• Make sure all antennas
and cables are properly
grounded.
Refer to
the Safety Tips sheet packed with your TV.
Protect your components
from
overheating
Do not block ventilation
holes in any of the components.
Arrange
the components
so that air can circulate freely.
• Do not stack components
Allow adequate
ventilation
when placing your components
in a
stand.
• Place an amplifier
on the top shelf of the stand so heated air rising
from it will not flow around
other components.
Connect
audio/video
cables
for best
results
• Required
for picture-in-picture
feature (this feature is not on all
models).
22
Advertisement
Table of Contents
