Lubrication Chart - Poulan Pro 271491 Owner's Manual

MAINTENANCE SCHEDULE ,,,_,,_-_ _ _,_ _
O..O.=..n
Check Tire Pressure 1
Check Operator Presence and
T
Interlock Systems
R
Check for Loose Fasteners V / V's I_ /
A Sharpen/Replace Mower Blades I_s
i
T Lubr_=k_ Cha, J Iv" I/i
0 Check Battery Level
R
Clean Battery and Termina_ _V' I_
Check Transaxie Cooling
Check V-Belts
E Change Engine Oil (without oll ltlter) l_,_. li/
N Clea. Air Filter _1_./:
G Clean Air Screen
i_ Inspect Muffler/Spark Attester I/
E
Replace Oil Filter (If equipped) I1_.=
Clean Engine Cooling Rns I_=
Replace Spark Plug _/± I_
Repta_e Air Filter Paper Car_dge
Replace Fuel Filter
1 - Chsnge more often when operating under a heavy load or
in Idgh amb_nt temperatures.
2 - Sew_ce more often when operating in dirty or dusty conditions.
3 - Replace blades mo_eoften when mowing kl sandy soil,
4 - Not required if equipped with maintenance-free battery.
5 - 11ghlen front axle I_NOtboft to 35 ft,-Ib=, maximum.
Do not overtighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual.
Some adjustments will need to be made
periodically to propedy maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug, clean or replace air filter, and
check blades and belts for wear. A new
spark plug and clean air filter assure
proper air-fuel mixture and help your
engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
@ Spindle----Z-i__ _ _ (D Spindle
Zerk
l ...T.T.=--===:===
@Front Wheel,- -; (_Froht Wheel
Bearing ,_ :== : Bearing Zerk
Engein
i
,~._ _ .... i
(_ENERAL PURPOSE GREASE
(2)REFER TO MAINTENANCE "ENGINE"
SECTION
IMPORTANT: DO not oil or grease the
pivot points which have special nylon
bearings. Viscous lubdcants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings, if you feel
they must be lubdcatad, use only a dry.
powdered graphite type lubdcant
16spadngly •