Remington RM191BV Owner's Manual page 9

6 I Chapter 3: Blower/Vac Assembly
Converting from
Blower to Vacuum, continued
4. Connect the tubes to the vacuum tube
adapter (see Figure 3-9). Align the tab
on the top tube with the notch on the
vacuum tube adapter. Press together
until you hear a "snap".
5. Position front of vacuum tube adapter
assembly over motor housing hook
(see Figure 3-10).
6. Pivot vacuum tube adapter assembly
to bottom of blower/vac housing.
Slightly press locking lever on vacu-
um tube adapter to allow adapter to
lock into place (see Figures 3-11 and
3-12).
Notch @
Tab
Figure3-9:Connectingvacuumtubestovacuumtube
adapter
®
Figure 3 -II: Pivoting v acuum tubeadapter to
blower/vac housing
Figure3-12:Pressing l ockinglever
Figure 3 -10: A ttaching vacuum tubeadapter tomotor
housing h ook