Mitsubishi Mr.Slim MSZ-A09NA Operating Instructions Manual page 7

FAN
Press (_ to select fan speed. Each press changes
fan speed
in the following order:
1
(AUTO) (Low) (Med.) (High)
* Two short beeps are heard from the indoor unit when set to AUTO.
VANE
Press (_ to select airflow direction. Each press
changes airflow direction in the following order:
UTO) (1) (2) (3) (4) (SWIN
. Two short beeps are heard from the indoor unit when set to AUTO.
. Press for 2 seconds or more to set to horizontal position. WIp_Ij
. Press once to cancel horizontal position.
• When the airflow direction is set to horizontal position, or when hori-
zontal position is cancelled, operation stops for about 3 minutes.
r'_ (AUTO) ......... The vane is set to the most efficient airflow direction. COOL/
DRY: horizontal position. HEAT: downward position.
4_ (Manual) ....... For efficient air conditioning, select upper position for COOL/
DRY, and lower position for HEAT. During COOL/DRY, vane
automatically moves to position (1) after around 1 hour to
prevent water dripping.
"t'-! (Swing) ......... The vane moves up and down intermittently.
_q Horizontal position
Recommended position during COOL/DRY. Air does not
blow directly to room occupants, providing comfortable airflow
distribution.
[] To change the horizontal airflow direction.
Move the vertical vane manually before starting operation.
ECONO COOl.
Press _ during COOL mode _ to start
ECONO COOL operation,
The unit performs swing operation vertically in various cycle according
to the temperature of the unit, Set temperature is set 4°F (2°C) higher
automatically,
ECONOC00L
Press _ again to cancel ECONO COOL operation.
VANE POWERFUL
• Pressing _ or _ also cancels ECONO COOL operation.
What is _EECONO COOL"?
Swing air flow (change of air flow) makes you feel cooler than constant air flow.
So, even though the set temperature is automatically set 4°F (2°C) higher, it is
possible to perform cooling operation with keeping comfort. As a result, energy
can be saved.
POWERFUL
Press _ during COOL mode _ to start
POWERFUL COOL operation,
Fan speed
Horizontal vane
: POWERFUL-high (exclusive speed for POWERFUL
mode)
: Set position, or downward airflow position during
AUTO setting
• Temperature cannot be set during POWERFUL COOL operation.
POWERFUL
Press _ again to cancel POWERFUL COOL
operation.
• POWERFUL COOL operation is cancelled automatically in 15 min-
utes.
• POWERFUL COOL operation is cancelled when the following buttons
are pressed:
ON/OFF button, FAN button, ECONO COOL button
i
En-6