Rear Panelterminals - Mitsubishi HS-U570 Owner's Manual

$ Rear PanelTerminals
J
1 2 3
I
4 5 6
(_ audio input and output terminals
These red and white terminals are for
receiving (IN) and sending (OUT) audio
signals. Red signifies the right channel,
and white signifies the left channel. Stereo
audio cables are also color coded red and
white. If you are receiving or sending a
mono (non-stereo) signal, you should use
only the left (white) terminal.
(_ video input and output terminals
These yellow terminals are for receiving
(IN) and sending (OUT) video signals. You
will only need to use these if you have a
monitor television, or for making copies of
tapes.
(_) antenna terminals
• antenna in (ANTENNA IN)
Use this terminal to attach an external
' antenna or cable. This "brings in" an
outside signal.
• antenna out (ANTENNA OUT)
Use this terminal to attach the VCR to
your TV. This terminal "sends out" the
signal to your TV.
®
®
®
converter box control terminal
(CONVERTER BOX CONTROL)
Use this terminal to connect a cable that
sends signals to a cable box or satellite
receiver. (The cable is available from your
Mitsubishi dealer, part name, IR EMIT-
TER.")
Use this cable if:
• your cable box, DSS ®, or PRIMESTAR ®
receiver cannot receive a signal from
the Converter Box Control Transmitter,
or
• you would like to place your cable box
or satellite receiver away from the
VCR.
A/V Network terminals
(ACTIVE A/V NETWORK)
Use these terminals to connect the VCR to
other Mitsubishi products that have
Active A/V Network terminals or A/V
Network terminals. (See page 19.)
timer reset button (TIMER RESET)
If you press this button, you will erase all
of your programmed recording settings,
reset the on-screen language, and also
reset the clock. Use this button with care.
11