Mitsubishi WS-A48 Owner's Manual page 13

Part I1: Installation
Back Panel
TV Rear Side Panel
1t/ Back Pa_
®®®
@ ®®®
@®®®
®®®®®
®
[] Monitor Out
The Monitor Output sends the TV audio and video signals (excluding component video or DTV
video) to an A/V receiver or other equipment.
[] Inputs 1-2
These inputs can be used for the connection of a VCR, Super VHS (S-VHS) VCR, laser disc player,
or other A/V device to the TV. With each input, you may connect to the S-VIDEO or VIDEO
terminal but not to both.
[] DTV Input
This input is used to connect a DTV receiver and can be configured for HDTV component
(YPbPr), RGB sync on green, and RGB plus H&V. Please see Appendix B, page 67, for signal
compatibility.
[] Component Inputs 1-2
-Ihese inputs can be used for the connection of A/V equipment with component video outputs, such
as a DVD player or Video Game System. Please see Appendix B, page 67, for signal compatibility.
(Model VS-A50 [4:3] only includes Component Input 1.)
[] Antenna (ANT-A, LOOP OUT, and ANT-B)
ANT-A and ANT-B receive signals from VHF/UHF antennas or a cable system. LOOP OUT sends
the ANT-A signal out to another component, such as a cable box or VCR.