Download Print this page

Payne PH10JA018000 User's Information Manual page 4

Advertisement

BEFOREYOU
REQUEST
A SERVICE CALL
BEFOREYOU
CALL FOR SERVICE,
CHECK FOR THESE
EASILY SOLVED
PROBLEMS:
• Check the indoor and outdoor discomaect switches. Veri_ that circuit breakers are ON or that filses have not blown.
• Check for sufficient airflow. Check the air filter(s) for any acculnulations
of dirt. Check for blocked return-air
or supply-air
grilles. Be
sure grilles are open and unobstructed.
• Check the settings on your indoor thermostat. If you desire cooling, see that the telnperature setting is set below room temper-
ature and COOL or AUTO is selected. If you require warmth, be sure the telnperature setting is set above rooln telnperature
and HEAT or AUTO is selected. The FAN switch should be set at ON for continuous blower operation or AUTO if you wish
the blower to fimction only while the unit is operating.
If your colnfort system still thils to operate, contact your servicing dealer for troubleshooting and repairs. Specify your apparent
problem, and state the model and serial numbers of your equiplnent. With this inforlnation, your dealer may be able m offer helpful
suggestions over the phone or save valtmble time tl_ough l_aowledgeable preparation for the service call.
REGULAR
DEALER
MAINTENANCE
In addition to the routine lnaintenance that you perforln, your holne COlnfort system should be inspected regularly by a properly
trained service teclmician. The inspection (preferably twice each year, but at least once every year) should include the following:
• Routine inspection of air filter(s). Replacement or cleaning as required.
• Inspection and cleaning of the blower wheel, housing, and lnotor as required.
• Inspection and, if required, cleaning of indoor and outdoor coils.
• Inspection of the indoor coil &ain pan, plus the primary and secondary drain lines. If supplied, the auxiliary drain pan and line should
be inspected at this tilne. Service should include cleaning if required.
• A check of all electrical wiring and comaections.
• A check for secure physical comaections of individtml colnponents within units.
• Operational check of the heat pump system m deterlnine acttml working condition. Necessary repair and!or adjustlnent should be
perforlned at this time.
Your servicing dealer may offer an econolnical service ccmtract that covers seasonal inspections. Ask for fimher details.
FOR THE RECORD
Record the lnodel, product, and serial numbers of your new equiplnent.
This information,
along with the other ready-
reference
t:acts requested,
will be necessary
should you ever require int\mnation
or service.
© 2001 Payne Heating & Cooling
7310 West Morris St. indianapolis,
IN 46231
11-01
Catalog
No 53PH-I018
OG-PH10-04

Advertisement

loading

This manual is also suitable for:

Ph10ja048000Ph10ja036000Ph10ja030000Ph10ja024000Ph10ja042000Ph10ja060000