Advertisement
Quick Links
PH4G- -- -B
For your convenience, please record the model and serial numbers of your new equipment in the spaces
provided. This information, along with the installation data and dealer contact information, will be helpful
should your system require maintenance or service.
UNIT INFORMATION
Model # _____________________________________
Serial # ______________________________________
ACCESSORIES (List type and model #)
_____________________________________________
_____________________________________________
_____________________________________________
Our products are designed, tested and built in accordance with DOE standardized procedures; however, actual operating results and
efficiencies may vary based on manufacturing and supplier tolerances, equipment configuration, operating conditions and installation
practices.
Owner's Guide
Fig. 1 - - Unit PH4G- -- -B
NOTE TO EQUIPMENT OWNER:
NOTE TO INSTALLER:
This manual must be left with the equipment owner.
SINGLE ---PACKAGED HEAT PUMP SYSTEM
WITH R ---410A REFRIGERANT
SINGLE AND THREE PHASE
INSTALLATION INFORMATION
Date Installed ________________________________
DEALERSHIP CONTACT INFORMATION
Company Name_______________________________
Address______________________________________
_____________________________________________
Phone Number _______________________________
Technician Name _____________________________
_____________________________________________
1
14 SEER
SIZES 24 TO 60
2 TO 5 NOMINAL TONS
A09183
Advertisement
Related Manuals for Payne PH4GNAB48000-TP
Summary of Contents for Payne PH4GNAB48000-TP
- Page 1 PH4G- -- -B 14 SEER SINGLE ---PACKAGED HEAT PUMP SYSTEM WITH R ---410A REFRIGERANT SINGLE AND THREE PHASE SIZES 24 TO 60 2 TO 5 NOMINAL TONS Owner’s Guide A09183 Fig. 1 - - Unit PH4G- -- -B NOTE TO EQUIPMENT OWNER: For your convenience, please record the model and serial numbers of your new equipment in the spaces provided.
-
Page 2: Safety Considerations
SAFETY CONSIDERATIONS CAUTION Improper installation adjustment, alteration, service, maintenance, or use can cause explosion, fire, electrical shock, or other CUT HAZARD conditions which may cause death, personal injury, or property damage. Consult a qualified installer, service agency, or your Failure to follow this caution may result in personal injury. distributor or branch for information or assistance. -
Page 3: Maintenance And Service
amount of heat absorbed from the outside air. So, to maintain This unit must have an air filter in place before it can be operated. energy- -efficient operation, your unit has an automatic defrost These filters should be located in at least one of two places. In mode. - Page 4 Units with bent indoor coils, install 24 x 18 x 1 (610 x 457 x 25 mm) filter first and then install 24 x 16 x 1 (610 x 406 x 25) filter. When installing the new filters, note the direction of the airflow arrows on the filter frame, which should be pointing at the indoor coil.
- Page 5 Regular Dealer Maintenance Warranty Certificate In addition to the type of routine maintenance you might be willing Your unit has a limited warranty. Be sure to read the warranty to perform, your unit should be inspected regularly by a properly carefully to determine the coverage for your unit.
- Page 6 Catalog No: OG ---PH4G ---03 E2016 Payne Heating & Cooling Systems D 7310 W. Morris St. D Indianapolis, IN 46231 Edition Date: 09/16 Replaces: OG--- PH4G--- 02 Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.