Panasonic Digital Palmcorder PalmSight PV-DV910 Operating Instructions Manual page 28

The LCD (Liquid Crystal Display) monitor
can be used while recording.
' LCD-OPEN
Button
1 Press the MENU Button to display the
menu screen.
2 Rotate the SELECT SET WHEEL to
select LCD/EVF SET from the menu
screen (see page 18).
3 Press the SELECT SET WHEEL to
display the LCD monitor adjustment
screen.
4 Press the SELECT SET WHEEL to
select BRIGHT or COLOR, then rotate
the SELECT SET WHEEL to adjust them.
5 Press the MENU Button to exit this
mode.
Before you begin...
• Connect the Palmcorder to a power source.
• Insert a cassette with record tab closed
(see page 14).
Press the LCD-OPEN Button to unlock
the LCD monitor.
Swing the LCD monitor fully open
and adjust the angle.
• The LCD monitor will automatically
turn on.
• When the LCD monitor is completely
closed, it will shut off automatically to
save power.
• Adjust the LCD monitor if necessary.
Start recording (see page 27).
• Using the LCD monitor will reduce
battery operating time.
Note:
• Using the LCD monitor will reduce battery
operating time.
• Close the LCD monitor completely when
not in use.
LCD BRIGHT
LOW 1Ill .... HIGH
LCO COLOR
PALE !111 .... VIVID
EVF BRIGHT
LOW 1111 .... HIGH
i •
28
Rotate the LCD monitor 180 degrees so
that it faces in the same direction as the
lens, while in the CAMERA mode, to record
yourself.
The picture in the LCD Viewfinder will
appear reversed. Select SELFoREC
MIRROR (see page 18) in the Camera
mode screen to see the picture as it is
actually being recorded.
For assistance, call 1-800-211-PANA(7262)