Panasonic Digital Palmcorder PalmSight PV-DV910 Operating Instructions Manual page 18

i. WIND-CUT (page 27)
To reduce sound distortion caused by
wind hitting the microphone. However,
this slightly deteriorates the sound
reproduction in the bass range.
k. REMOTE (page 31)
VCRI:To receive signals from the
Remote Control set to VCR1.
VCR2:To receive signals from the
Remote Control set to VCR2.
OFF: To prevent reception of signals
from the Remote Control.
I.
INDEX (page 35)
DAY: An index signal is recorded
when recording is restarted
after the date has changed
since the last recording.
2 HOUR: An index signal is recorded
when recording is restarted
after a lapse of more than 2
hours.
m. TALLY-LED (page 27)
Tally LED lights during recording when
set to ON.
n. BEEP
Set to ON to beep when starting and
stopping camera recording or when
unusual conditions occur. To cancel
the beep, set to OFF.
Palmcorder will beep:
• Once when you start recording
• Twice when you stop recording
• Repeatedly when warning of
unusual conditions (see page 22, 23).
o. DISPLAY (page 20)
To select the desired type of display
and counter indication displayed on the
LCD Monitor or in the viewfinder.
p. C.RESET (page 20)
Setting to ON, resets the counter to
zero.
q°
DATE/TIME (page 21)
To display the date and time can be set
on the screen.
CLOCK-SET (page 15)
When set to ON, the date and time can
be set on the screen.
s. SELF-REC (page 28)
NORMAL: During self-recording, the
picture on the LCD Monitor
is the same as it will be
recorded.
MIRROR: During self-recording, the
picture on the LCD Monitor
is horizontally reversed.
t. LCD/EVF SET (page 28)
Setting to ON displays the menu for
adjusting the LCD brightness and color
level and the viewfinder brightness.
18 For assistance, call 1-800-211-PANA(7262)