Audio - LG Smart 3D Blu-Ray BH6830SW Owner's Manual

72 Appendix
Audio Output Specifications
___Setting HDMI OUT
Source "_ PCMStereo ' PCFAMulti-Ch' DTSRe-encode _ ' BitStream_2
Dolby Digital PCM2oh PCM5,1ch DTS Dolby Digital
Dolby Digital Plus PCM2oh PCM5,1ch DTS DolbyDigital Plus
DoIbyTrueHD PCM2oh PCMS,lch DTS DoibyTrueHD
DTS
PCM2oh PCMS,lch DTS DTS
PCM2oh PCMS,lch DTS DTS-HD
Linear PCM PCM2ch PCM2ch DTS LinearPCM 2ch
Linear PCM5,1ch PCM2oh PCM5,1ch DTS LinearPCM5.1ch
Linear PcM 7;i ch PCM2oh PCMS,lch DTS LinearPCM7.1ch
/
_1 The secondary and interactive audio may not
be included in the output bitstream if [Digital
Output] option is set to [Bit Stream]. (Except
LP(M Codec : the output always include
interactive and secondary audio.)
_2 This player automatically selects the HDMI
audio according to the decoding capability
of the connected HDMI device even though
[Digital Output] option is set to [Bit Stream].
% If:the [Digital Output] option is set to [r)TS re-
encode], the audio output is limited to 48 kHz
and 5.1Ch. If:the [Digital Output] option is set
to [r)TS re-encode], the DTS Re-encode audio
is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like [Bit
Stream]).
• The audio is outputted as PCM 48 kHz/16 bit for
MP3/WMA file and PCM 44.1 kHz/16 bit for Audio
(.D while playback.
• With digital audio connection (HDMI OUT), Disc
Menu button sounds of BD-ROM may not be
heard if the [Digital Output] option is set to [Bit
Stream].
• If:the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
Multi-channel Digital Surround Sound via
digital connection can only be obtained if your
receiver is equipped with a Digital Multi-channel
decoder.
This setting is not available on the input signal
from an external device.