Audio] Menu - LG Smart 3D Blu-Ray BH6830SW Owner's Manual
Smart 3d blu-ray
Hide thumbs
Also See for Smart 3D Blu-Ray BH6830SW:
- Specifications (2 pages) ,
- Owner's manual (82 pages)
Table of Contents
Advertisement
System
Setting
31
[AUDIO]
menu
Each disc has a variety of audio output
options.
Set
the player's Audio options
according
to the type of
audio system you use.
7-
@
Note
Since many factors affect the type of audio
output,
see "Audio Output
Specifications"
on
page 72 for details.
Digital
Output
[PCM Stereo]
(HDMI only)
Select if you connect
this unit's HDMI OUT jack
to a device with two-channel
digital
stereo
decoder.
[PCM Multi-Ch]
(HDMI only)
Select if you connect
this unit's HDMI OUT jack
to a device with multi-channel
digital decoder.
[DTS Re-Encode]
(HDMI
only)
Select if you connect
this unit's HDMI OUT jack
to a device with DTS decoder.
[Bit Stream]
(HDMI only)
Select if you connect
this unit's HDMI OUT jack
to a device with LPCM, Dolby Digital, Dolby
Digital Plus, DolbyTrueHD,
DTS and DTS-HD
decoder.
.-
@
Note
• When
[Digital Output]
option
is set to [PCM
Multi-Ch],
the audio may output
as PCM
Stereo if the PCM Multi-Ch
information
is
not detected
from HDMI device with
EDID.
• If the [Digital Output]
option
is set to [r)TS
Re-Encode],
the DTS Re-Encode audio
is
outputted
for BD-ROM discs with secondary
audio and the original
audio is outputted
for
the other discs (like [Bit Stream]).
• This setting
is not available
on the input
signal from an external
device.
DRC
(Dynamic
Range
Control)
This function
allows you to listen to a movie at a
lower volume
without
losing clarity of sound.
[off]
Turns off this function.
[On]
Compress the dynamic
range of the Dolby
Digital, Dolby Digital Plus or DolbyTrueHD
audio output.
[Auto]
The dynamic
range of the DoJby TrueHD audio
output
is specified
by itself]
And the dynamic
range of the Dolby Digital
and Dolby Digital Plus are operated
as same as
the [On] mode.
----i @
Note
he DRCsetting can be changed only when a
isc is not inserted or the unit is in complete
top mode.
Connect
wireless
speakers
When the unit is manufactured,
the ID is already
set. If interference
occurs or you use a new wireless
unit, an ID should be set again.
3
Og
Advertisement
Table of Contents
