Panasonic Palmcorder IQ PV-A306 Manual page 34

Hide thumbs Also See for Palmcorder IQ PV-A306:
Table of Contents

Advertisement

If you have a problem with your Palrncorder, it may be something you can correct yourself.
Check the list below for symptoms and corrections.
.......
Sy,rn,p,!,om,,
Correction
No piclure in the EVF _.
Make surea PowerSource isconnected, (pp, 7, 9)
• Make sure the POWER switchis set to VCR or
CAMERA. (pp. 20, 23)
• Check the Dew Indiqator. (p, 17)
• Make sure the battery is fully charged,(p, 7)
• Make sure all necessary cables are connected
correctlyan d firmly, (p. 25)
Video cassette can't be inserted ...
Make sure a Power Sourceis connected, (pp. 7, 9)
Insertthe cassette with the window side facing out.
(p. 10)
Video cassette can't be removed ...
. Make sure a PowerSourceis connected_iPP'."/,9)
No operation starts when operation buttons • Check the Dew indicator. (p'.]7 i
are pressed ,..
Recording cannot be done ...
• Make sure the record tab is still intact. (p. 10)
, Check the Battery Indicator. (p. 15)
• Check the Dew Indicator. (p. 17)
Auto Focus does noi'operate ...
, MakesuretheFOCUSbuttonis set to AUTO.(p.27)
• Make sure t_e unit is ON, with the POWER
switch set 1oCAMERA (p, 20).
Sound from microphonecan'tbe monitored ._ • Make sure the unit is set to REC
or RecordtPause mode.
Camera picture is too dark ....
Make sure the HIGH SPEED SHUTTER button is
OFF (p. 28).
No playback picture,or the playback
• Press the Clock Set UP A/DOWN • button
pictureis noisy or contains streaks _.
during playback (Tracking Control) (p. 23),
During playback, the picture shows motion
• Portions of the still picture where the normal
or blurred action _.
speed motion was particularly rapid may produce
this effect. This is normal.
• Set the POWER switchto OFF and then CAMERA.
"Panasonic Palmcorder IQ IT'S VHS! SO
ITS TAPES PLAY IN YOUR VCR"
appears in the EVF and Monitor ..
II the top ol your playback picture waves
back and forth excessively ..,
• Because the playback signal is not as stable as
an off the air TV signal, the top of your TV screen
may be bent or unstable when the tape is played
back. This symptom is more noticeable when a
lape, recorded on another VCR, is playedback,
To solve this problem, locate the horizontal hold
control on your TV. Turn it slowly to correct the
wavy picture. If your TV does not have a
horizontal hold control or adjusting the control
does not help, some modifications may have to
be made to the TV set. Technically this is called
"Horizontal AFC time constant change," If such a
problem exists, please contact your local TV
service center. (Some nominal service charges
may be required.)
34

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents